Table Of Contents Contents Chapter 1. It supports three-pin head connector. The Optimal Defaults are the default values set by the mainboard manufacturer specifically for the optimal performance of the mainboard. Enter text from picture: For some components, if you install in the wrong orientation, the components will not work properly. Shielded interface cables and A. You can use the arrow keys to select the item.

Uploader: Nejora
Date Added: 28 May 2008
File Size: 18.99 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92251
Price: Free* [*Free Regsitration Required]

If you change these settings, you must reboot the system until it enters cnipset operating system and then power off the system. If the Security Option is set to System, the password is required both at boot and at entry to Setup. Hardware Setup Hardware Setup This chapter provides you with the information about hardware setup procedures.

Chapter 4 Full-Duplex mode permits simultaneous two-direction transmission. You need to select the MPS version supported by your operating system. Half Duplex and Full Duplex.

Support For MS | Motherboard – The world leader in motherboard design | MSI Global

Swap Floppy Setting to Enabled will swap floppy drives A: While doing smi installation, be careful in holding the compo- nents and follow the installation procedures. Cpu Chapter 2 Central Processing Unit: Page 65 Chapter 3 Shielded interface cables and A.


Hardware Setup Hardware Setup Chapter 2. Chapter 2 Connect the fan power cable to the 3-pin fan power connector on the board. By doing so, the changed settings will come into effect next time you power on the system.

Don’t have chioset account?

MSI MS-6534 Rev 1 MS 6534 MS6534 Motherboard Intel socket 478 AGP 3x PCI LAN USB

Socket for Intel Pentium 4 Processors Memory: Avoid turning the power off while the HDD is working. Locate the CPU and its retention Position the heatsink onto the mechanism on the motherboard.

The openings on the enclosure are for air convection hence protects the equipment from overheating. Chapter 4 Exit Without Saving When you want to quit the Setup menu, you can select this option to abandon the changes.

Power Saving Switch Connector: Disable the controller if you want to use other controller cards to connect to a modem. As chipset does not properly support the PC memory, it is strongly recommended to install PC DIMM modules for better system performance and stability.


Microstar (MSI) Motherboard

Press any key to wake up the system. Selecting Auto allows the mainboard to detect whether an audio device is used.

This would prevent unauthorized use of your computer. Table Of Contents Contents Chapter 1.

MSI MS-6534 – motherboard – micro ATX – Socket 478 – i845 Series

There are two types of LEDs you can connect from the system case to the pin: To find out which version to use, consult the vendor of your operating system. This item applies only when synchronous DRAM is installed in the system.

Lay this equipment on a reliable flat surface before setting it up. A message as below will appear on the screen: A message as below will appear on the screen. Each category includes none, one or more setup items. If you want to configure the system by yourself, select Manaul. IDE-0 3rd Boot Device: